Peroxigard™ RTU - 5 Gallon Pail

Peroxigard Ready-To-Use eliminates variables in your cleaning and disinfection protocols, driving efficiency by removing the risks associated with dilution, activation and/or deactivation.  Ideal for cleaning and disinfecting bio-safety cabinets, laboratory equipment and tools, cages, work stations, animal housing rooms, high-touch surfaces, and surgical suites.

Peroxigard cleans, disinfects and deodorizes in one step, easily and consistently achieving contact time compliance in the presence of a soil load (<5%) while remaining gentle on animals, people, surfaces and the planet.  Guard your animals, people and research with Peroxigard.

Product Sizes:

• 5 gallon pail

SKU: 242109

Instructions

• For Use as a One-Step Cleaner/Disinfectant: 1. Pre-clean visibly soiled areas. 2. Spray 6-8 inches from hard, non-porous surfaces. 3. Allow surfaces to remain visibly wet for 1 minute. 4. Allow to air dry.
• For Use to Clean and Disinfect Life Science Laboratory Surfaces, Instruments, and Equipment: 1. Pre-clean visibly soiled areas. 2. Spray 6-8 inches from hard, non-porous surfaces. 3. Allow surfaces to remain visibly wet for 1 minute.
• For glassware/instruments/equipment: Rinse surface thoroughly and let air dry before reuse.
• For surfaces: Wipe with a dry, clean cloth or let air dry.
• For Use on Animal Housing: 1. Remove all animals and feeds from areas being treated. 2. Remove all litter and fecal matter from floors, walls and surfaces of kennels, cages and other areas occupied or traversed by animals. 3. Empty or cover feeding and watering appliances. 4. Thoroughly clean all surfaces with this product and rinse with water. 5. Spray this product 6-8 inches from floors, walls, cages and other hard, non-porous surfaces. To disinfect, all surfaces must remain visibly wet for 1 minute. 6. For disinfection of feed racks, automatic feeders, fountains and water appliances spray with solution and allow surface to remain visibly wet for 1 minute. Rinse with potable water before reuse.
• For Use as a Boot/Shoe Wash Disinfectant: To prevent cross contamination between treated hard, non-porous surfaces, shoe washes should be accessible at all entrances to buildings. 1. Scrape waterproof shoes or boots and spray this product 6-8 inches from surfaces until visibly wet. 2. Allow product to remain in contact with shoes or boots for 1 minute and let air dry. 3. All treated surfaces that will contact feed or drinking water must be thoroughly scrubbed with soap or detergent and then rinsed with potable water before reuse.
• To Kill Mold and Mildew: 1. Pre-clean surfaces by following the cleaner instructions. 2. Spray 6-8 inches from hard, non-porous surfaces until visibly wet. 3. Allow the surface to remain visibly wet for 4 minutes. 4. Allow to air dry.
• For Use as a Disinfectant with a Mechanical Sprayer/ Low Pressure Sprayer: 1. Fill tank with solution. 2. Pre-clean visibly soiled areas. 3. Spray hard, non-porous surfaces, making sure to wet surfaces thoroughly. 4. All surfaces must remain visibly wet for 1 minute. 5. Let air dry.
• For Use to Disinfect Inanimate Environmental Surfaces Associated with Aquaculture: 1. Remove all feeds from premises or vehicles. 2. Remove excess debris. 3. Saturate all hard, non-porous surfaces by spraying with solution 6-8 inches until visibly wet. 4. Allow surfaces to remain visibly wet for 1 minute. 5. Rinse the surfaces thoroughly with water. 6. Let air dry or wipe dry.
• To Disinfect Non-Critical , Pre-cleaned Instruments: 1. Instruments must be thoroughly pre-cleaned to remove excess organic debris, rinsed, and rough dried. 2. Spray 6-8 inches from all hard, non-porous surfaces of instruments with this product until visibly wet. 3. Allow surfaces to remain visibly wet for 1 minute. 4. Wipe with a clean, damp cloth or paper towel and allow to air dry.
• For Use as a Non-Food Contact Sanitizer: 1. Pre-clean visibly soiled areas. 2. Spray 6-8 inches from the hard non-porous surface until completely wet. 3. Allow the surface to remain visibly wet for 10 seconds. 4. Allow to air dry.
• For Use as a Cleaner and/or Deodorizer: 1. Remove visible soils. 2. Spray onto soiled surfaces until visibly wet. 3. Allow to air dry or wipe surface dry, or rinse.
• For Use as Sanitizer on Soft Surfaces: 1. Hold bottle upright 6-8 inches from surfaces. 2. Spray until fabric area is visibly wet. Do not saturate. 3. Allow surfaces to remain visibly wet for 30 seconds. Allow to air dry. 4. To test for color fastness, locate a small inconspicuous area on your fabric and apply the solution as per the use directions. Once dry evaluate discoloration.
• To Kill Corynebacterium bovis (C. bovis): 1. Pre-clean surfaces. 2. Spray 6-8 inches from hard, non-porous surfaces. 3. Allow the surface to remain visibly wet for 2 minutes. 4. Let air dry.
• To Kill Chlamydia psittaci (C. psittaci): 1. Pre-clean surfaces. 2. Spray 6-8 inches from hard, non-porous surfaces. 3. Allow the surface to remain visibly wet for 1 minute. 4. Let air dry